John Deere Omar287594 — Using Rear Wheel Weights

Performance Ballasting Using Rear Wheel Weights CAUTION: When installing weights, use appropriate equipment or have the job performed by your John Deere Dealer. NOTE: When using 1524 mm (60 in.) tread setting, maximum of two 205 kg (450 lb) or one 635 kg (1400 lb) weight can be installed on inside of wheel. Install weight (A) on wheel. Weight Attaching Bolts—Specification M16­Bolt—Torque............................................................ 310 (230 lb­ft) M20­Bolt—Torque............................................................ 610 (450 lb­ft) RXA0056676 —UN—06SEP01 For additional weights, install bolts in previous weight. Rotate alternate weight to align bolts with weight holes.

Tighten bolts and then retighten after driving approximately 100 meters (100 yd). Retighten bolts after working 3 HOURS and again after 10 HOURS . A—Rear Wheel Weight Check tightness every 250 hours. IMPORTANT: Inside wheel weights must have at least 25 mm (1 in.) clearance between weight and tractor components. BB92646,0000044 ­19­18AUG05­1/1 75­14 122208 PN=191