Rear Wheels, Tires, and Treads Service Tires Safely CAUTION: Explosive separation of a tire and rim parts can cause serious injury or death. Do not attempt to mount a tire unless you have the proper equipment and experience to perform the job. Always maintain the correct tire pressure. Do not inflate the tires above the recommended pressure. Never weld or heat a wheel and tire assembly. The heat can cause an increase in air pressure resulting in a tire explosion. Welding can structurally weaken or deform the wheel. When inflating tires, use a clipon chuck and extension hose long enough to allow you to stand to one side and NOT in front of or over the tire assembly.
Use a safety cage if available. Check wheels for low pressure, cuts, bubbles, damaged rims or missing lug bolts and nuts.
TS211 —UN—23AUG88 DX,RIM1 1927OCT081/1 Tire Combination Tables Rear Tire Group Sizes Front Tire Group Sizes OURX935,000047C 1915AUG081/1 811 122208 PN=218 Minimum Recommended Row Width 508 mm (20 in.) 558.8 mm (22 in.) 660.4 mm (26 in.) 762 mm (30 in.) 812.8 mm (32 in.) 1016+ mm (40+ in.) Tire Section Width Group Size 320 mm (12.4 in.) 380 mm (14.9 in.) 420 mm (16.9 in.) 480 mm (18.4 in.) 520 mm (20.8 in.) 620 mm (24.5 in.) 710 mm (28 in.) 800 mm (30.5 in.) 900 mm (35.4 in.) 48 520/85R46 620/70R46 650/85R38 710/70R42 800/70R38 47 650/65R42 650/75R38 620/70R42 710/70R38 Minimum Recommended Row Width 508 mm (20 in.) 558.8 mm (22 in.) 660.4 mm (26 in.) 762 mm (30 in.) 812.8 mm (32 in.) 1016+ mm (40+ in.) Tire Section Width Group Size 290 mm (11.2 in.) 320 mm (12.4 in.) 380 mm (14.9 in.) 420 mm (16.9 in.) 480 mm (18.4 in.) 520 mm (20.8 in.) 620 mm (23.1 in.) 44 540/75R34 620/75R30 43 420/85R34 480/70R34 540/65R34 600/70R30 42 16.9R30 480/70R30 540/65R30 600/65R28