John Deere Omar287594 — Clamp-On Dual Usage

Rear Wheels, Tires, and Treads Rear Dual Wheel Tread Settings—710 and 800 Tires a with 15 in. extension a with 15 in. extension a with 15 in. extension OURX935,00004AE ­19­25AUG08­1/1 Clamp­On Dual Usage IMPORTANT: Clamp­on duals should not be used for heavy traction work. They are allowed only for use when the following conditions are met including recommended tire sizes and manufacturers. Steel wheel­to­cast hub cap screws and washers are replaced with cap screws and washers contained in kit AR217153. Use rear wheel bolt tightening procedure (See Tightening Rear Wheel Bolts in this section). Inner single wheel tread setting does not exceed 1900 mm (75 in.).

Outer dual wheel tread setting does not exceed 3400 mm (134 in.). Average tread width of dual combination does not exceed 2650 mm (104 in.). Outer tire must be of equal or smaller section width tire. Drive wheels and clamp­on dual tires should be inflated to the same pressure. IMPORTANT: Do not drive tractors equipped with duals faster than 40 km/h (25 mph). Clamp­on dual wheels are used only in low draft or PTO applications. Maximum vehicle weight is limited to 16000 kg (35274 lb). Rear drive wheel is heavy duty cast center type. Current wheel sleeve cap screws and washers are replaced with cap screws and washers contained in kit AR219840 for cast drive wheel.

OURX935,000049A ­19­15AUG08­1/1 81­12 122208 PN=229 710/70R42 Tire on 3015 mm (118.5 in.) Axle Single Tire Dual Tire Position Minimum Maximum Maximuma Position Minimum Maximum IN N/A N/A N/A IN N/A N/A OUT N/A N/A N/A IN N/A N/A IN 1732 mm (68.2 in.) 1974 mm (77.7 in.) 1974 mm (77.7 in.) OUT 3380 mm (133.1 in.) 3621 mm (142.6 in.) OUT 1806 mm (71.18 in.) 2044 mm (80.5 in.) 2278 mm (89.7 in.) OUT 3384 mm (133.2 in.) 3621 mm (142.6 in.) 710/70R38 Tire on 3015 mm (118.5 in.) Axle Single Tire Dual Tire Position Minimum Maximum Maximuma Position Minimum Maximum IN N/A N/A N/A IN N/A N/A OUT N/A N/A N/A IN N/A N/A IN 1732 mm (68.1 in.) 1968 mm (77.5 in.) 1974 mm (77.7 in.) OUT 3310 mm (130.3 in.) 3342 mm (139.6 in.) OUT 1806 mm (71.18 in.) 1968 mm (77.5 in.) 2278 mm (89.7 in.) OUT 3384 mm (133.2 in.) 3342 mm (139.6 in.) 800 Tire on 3015 mm (118.5 in.) Axle Single Tire Dual Tire Position Minimum Maximum Maximuma Position Minimum Maximum IN N/A N/A N/A IN N/A N/A OUT N/A N/A N/A IN N/A N/A IN 1826 mm (71.9 in.) N/A 2126 mm (83.7 in.) OUT 3958 mm (155.8 in.)a 4260 mm (167.7 in.)a OUT N/A N/A N/A OUT N/A N/A