John Deere Omar287594 — Towing Tractor

Transport Driving Tractor on Roads traveling on a highway or public roads, except where prohibited by law. CAUTION: Avoid personal injury or death from losing control of tractor. When driving tractor on roads: Couple brake pedals together If equipped, use foot throttle instead of hand throttle Reduce speed when driving on icy, wet, or graveled surfaces Ballast tractor correctly (See Performance Ballasting section) Prevent wheels from locking and skidding on tractors equipped with AutoPowr transmission. (See DOWNHILL OPERATION IN SLIPPERY CONDITIONS, in Operating AutoPowr Transmission section.) Lights —Use headlights and turn signals day and night.

Follow local regulations for equipment lighting and marking. Keep lighting and marking visible and in good working order. Replace or repair lighting and marking that has been damaged or lost. An implement safety lighting kit is available from your John Deere dealer. Brakes —Tap brake pedal to ensure differential lock is NOT engaged. Couple brake pedals together before driving on a road . Avoid hard application of brakes. MFWD —Disengage front wheel drive when transporting tractor. When driving on roads, engage BRAKE ASSIST position of MFWD switch to provide four wheel braking.

(See USING MFWD in Operating Tractor section.) Prevent collisions between other road users, slow­moving tractors with attachments or towed equipment, and self­propelled machines on public roads. Frequently check for traffic from the rear, especially in turns, and use turn signal lights. Remote Cylinders —Position transport lock switch(es) to eliminate possibility of lowering an implement during transport by inadvertently bumping the extend/retract lever(s). (See procedure in Hydraulic System—Lever Operated SCVs or TouchSet Controls section.) Check headlights, flashing warning lights and tail lights before operating tractor on highway. Adjust rear­view mirrors and clean windows.

Front or Rear Hitch —Position or lock hitch in transport position to eliminate possibility of lowering an implement during transport by inadvertently bumping the raise/lower lever. (See procedure in Hitch section.) CAUTION: To prevent possible personal injury, always operate flashing lights when OURX935,000053E ­19­04SEP07­1/1 Transporting with Ballast CAUTION: Avoid possible injury or equipment damage when transporting heavy rear­mounted implements. Drive slowly over rough ground, regardless of how much ballast is used. Add weight to front end if needed to maintain stability and steering control. Heavy pulling and heavy rear­mounted implements tend to lift front wheels.

Use implement code in implement operator’s manual to determine the minimum number of front weights required. RF30435,0000034 ­19­04SEP07­1/1 85­1 122208 PN=230