Fuels, Lubricants, and Coolant Heavy Duty Diesel Engine Coolant The engine cooling system is filled to provide yearround protection against corrosion and cylinder liner pitting, and winter freeze protection to 37°C (34°F). If protection at lower temperatures is required, consult your John Deere dealer for recommendations. unavailable in the geographical area where service is performed. If these coolants are unavailable, use a coolant concentrate or prediluted coolant intended for use with heavy duty diesel engines and with a minimum of the following chemical and physical properties: Is formulated with a quality nitritefree additive package.
Provides cylinder liner cavitation protection according to either the John Deere Cavitation Test Method or a fleet study run at or above 60% load capacity. Protects the cooling system metals (cast iron, aluminum alloys, and copper alloys such as brass) from corrosion. John Deere COOLGARD™II Premix Coolant is preferred. John Deere COOLGARD II Premix is available in a concentration of 50% ethylene glycol. Additional Recommended Coolants The following engine coolants are also recommended: John Deere COOLGARD II Concentrate in a 40% to 60% mixture of concentrate with quality water. John Deere COOLGARD Premix (available in a concentration of 50% ethylene glycol).
John Deere COOLGARD Concentrate in a 40% to 60% mixture of concentrate with quality water. John Deere COOLGARD PG Premix (available in a concentration of 55% propylene glycol). The additive package must be part of one of the following coolant mixtures: ethylene glycol or propylene glycol base prediluted (40% to 60%) heavy duty coolant ethylene glycol or propylene glycol base heavy duty coolant concentrate in a 40% to 60% mixture of concentrate with quality water John Deere COOLGARD II Premix and COOLGARD II Concentratecoolants do not require use of supplemental coolant additives. Water Quality Water quality is important to the performance of the cooling system.
Distilled, deionized, or demineralized water is recommended for mixing with ethylene glycol and propylene glycol base engine coolant concentrate. John Deere COOLGARD Premix, COOLGARD Concentrate, and COOLGARD PG Premix do not require use of supplemental coolant additives, except for periodic replenishment of additives during the drain interval. IMPORTANT: Do not use cooling system sealing additives or antifreeze that contains sealing additives. Use John Deere COOLGARD PG Premix when a nontoxic coolant formulation is required. Do not mix ethylene glycol and propylene glycol base coolants.
Other Coolants It is possible that John Deere COOLGARD II, COOLGARD, and COOLGARD PG coolants are Do not use coolants that contain nitrites. COOLGARD is a trademark of Deere & Company DX,COOL3 1903NOV081/1 908 122208 PN=244