Fuels, Lubricants, and Coolant Additional Information About Diesel Engine Coolants and John Deere COOLGARD™II COOLANT EXTENDER Engine coolants are a combination of three chemical components: ethylene glycol or propylene glycol antifreeze, inhibiting coolant additives, and quality water. Avoid Automotivetype Coolants Never use automotivetype coolants (such as those meeting ASTM D3306). These coolants do not contain the correct additives to protect heavyduty diesel engines. Do not treat an automotive engine coolant with supplemental coolant additives because the high concentration of additives can result in additive fallout.
Coolant Specifications John Deere COOLGARD™II Premix is a fully formulated coolant that contains all three components in their correct concentrations. DO NOT add an initial charge of John Deere COOLGARD II COOLANT EXTENDER to COOLGARD II Premix. DO NOT add any other supplemental coolant additive or water to COOLGARD II Premix. Water Quality Water quality is important to the performance of the cooling system. Distilled, deionized, or demineralized water is recommended for mixing with ethylene glycol and propylene glycol base engine coolant concentrate. All water used in the cooling system should meet the following minimum specifications for quality:
John Deere COOLGARD II Concentrate contains both ethylene glycol and inhibiting coolant additives. Mix this product with quality water, but DO NOT add an initial charge of John Deere COOLGARD II COOLANT EXTENDER or any other supplemental coolant additive. Replenish Coolant Additives Some coolant additives will gradually deplete during engine operation. Periodic replenishment of inhibitors is required, even when John Deere COOLGARD II Premix or COOLGARD II Concentrate is used. Follow the recommendations in this manual for the use of John Deere COOLGARD II COOLANT EXTENDER.
Freeze Protection The relative concentrations of glycol and water in the engine coolant determine its freeze protection limit. Why use John Deere COOLGARD II COOLANT EXTENDER? Operating without proper coolant additives will result in increased corrosion, cylinder liner erosion and pitting, and other damage to the engine and cooling system. A simple mixture of ethylene glycol or propylene glycol and water will not give adequate protection.
John Deere COOLGARD II COOLANT EXTENDER is a chemically matched additive system designed to fortify the proprietary additives used in John Deere COOLGARD II Premix and COOLGARD II Concentrate and to provide optimum protection for up to 6 years or 6000 hours of operation. DO NOT use a coolantwater mixture greater than 60% ethylene glycol or 60% propylene glycol.
COOLGARD is a trademark of Deere & Company DX,COOL17 1903NOV081/1 9011 122208 PN=247 Chlorides Sulfates Total dissolved solids Total hardness pH 5.5 to 9.0 Ethylene Glycol Freeze Protection Limit 40% 24°C (12°F) 50% 37°C (34°F) 60% 52°C (62°F) Propylene Glycol Freeze Protection Limit 40% 21°C (6°F) 50% 33°C (27°F) 60% 49°C (56°F)