John Deere Omar287594 — Transmission and Hydraulic Oil

Fuels, Lubricants, and Coolant Testing Diesel Engine Coolant Maintaining adequate concentrations of glycol and inhibiting additives in the coolant is critical to protect the engine and cooling system against freezing, corrosion, and cylinder liner erosion and pitting. COOL­GARD II coolants. If the test strip chart indicates that additive is required, add John Deere COOL­GARD II COOLANT EXTENDER as directed. Add only the recommended concentration of John Deere COOL­GARD II COOLANT EXTENDER. DO NOT add more than the recommended amount. Test the coolant solution at intervals of 12 months or less and whenever excessive coolant is lost through leaks or overheating.

When Using John Deere COOL­GARD Coolant Test Strips Compare the test strip results to the supplemental coolant additive (SCA) chart to determine the amount of inhibiting additives in your coolant and whether more John Deere LIQUID COOLANT CONDITIONER should be added. Coolant test strips are available from your John Deere dealer. These test strips provide a simple, effective method to check the freeze point and additive levels of your engine coolant. When Using John Deere COOL­GARD II Add only the recommended concentration of John Deere LIQUID COOLANT CONDITIONER. DO NOT add more than the recommended amount.

John Deere COOL­GARD™II Premix and COOL­GARD II Concentrate are maintenance free coolants for up to 6 years or 6000 hours of operation, provided that the cooling system is topped off using only John Deere COOL­GARD II Premix coolant. Test the coolant condition annually with coolant test strips designed for use with John Deere CoolScan and CoolScan PLUS For a more thorough evaluation of your coolant, perform a CoolScan™or CoolScan PLUS™analysis, where available. See your John Deere dealer for information.

COOL­GARD is a trademark of Deere & Company CoolScan is a trademark of Deere & Company CoolScan PLUS is a trademark of Deere & Company DX,COOL9 ­19­03NOV08­1/1 OILSCAN ™and COOLSCAN OILSCAN ™and COOLSCAN ™are John Deere sampling programs to help you monitor machine performance and identify potential problems before they cause serious damage. T6828AB —UN—15JUN89 Oil and coolant samples should be taken from each system prior to its recommended change interval. Check with your John Deere dealer for the availability of OILSCAN ™and COOLSCAN ™kits. T6829AB —UN—18OCT88 OILSCAN is a trademark of Deere & Company. COOLSCAN is a trademark of Deere & Company.

DX,OILSCAN ­19­12MAY08­1/1 90­12 122208 PN=248