John Deere Omar287594 — Gear Oil

Fuels, Lubricants, and Coolant Transmission and Hydraulic Oil Use oil viscosity based on the expected air temperature range during the period between oil changes. The following oils are preferred: John Deere HY­GARD™ John Deere Low Viscosity HY­GARD™ Other oils may be used if they meet one of the following: John Deere Standard JDM J20C John Deere Standard JDM J20D Use John Deere BIO­HY­GARD™oil when a biodegradable fluid is required. 1 TS1660 —UN—10OCT97 HY­GARD is a trademark of Deere & Company BIO­HY­GARD is a trademark of Deere & Company 1 BIO­HY­GARD meets or exceeds the minimum biodegradability of 80% within 21 days according to CEC­L­33­T­82 test method.

BIO­HY­GARD should not be mixed with mineral oils, because this reduces the biodegradability and makes proper oil recycling impossible. DX,ANTI ­19­11JAN08­1/1 Powershift Transmission Recalibration be recalibrated in order to maintain smooth shifting characteristics. See your John Deere Dealer. Your tractor’s transmission is factory filled with John Deere HY­GARD® oil. When changing transmission­hydraulic oil from one viscosity to another, powershift control unit must HY­GARD is a trademark of Deere & Company OURX935,000042D ­19­11JAN08­1/1 Independent Link Suspension Differential Case Oil NOTE:

The Independent Link Suspension differential case is connected to the transmission case and operates using the same oil. There is no fill location. OURX935,000042F ­19­11JAN08­1/1 90­13 122208 PN=249