John Deere Omar287594 — Lubricating Independent Link Suspension Axle—External Fittings

250 Hour Service Lubricating MFWD U­Joints RXA0095780 —UN—21AUG07 RXA0095783 —UN—21AUG07 1500 MFWD Axle 1300 MFWD Axle A—Plug Use John Deere SD Polyurea grease or other grease as specified in Fuel, Lubricants and Coolant section. In extremely wet conditions service daily or every 10 Hours. 1. Replace plugs (A) with M10 thread 90° grease fittings, part number 58M5580. 2. Lubricate U­joints daily or every 10 hours. 3. Replace grease fitting with plug and tighten to torque specification. Apply grease to both U­joints, using fitting (A). Drilled passages in the cross allow grease to reach all four bearings from a single grease fitting.

Specification Plug—Torque................................................................... 0.904 (8 lb­in) For normal operations, outboard U­joints are sealed and not equipped with grease fittings. For extremely wet conditions: OURX935,00002BC ­19­13AUG08­1/1 102­4 122208 PN=264