250 Hour Service Draining Fuel Tank Sump IMPORTANT: Use wrench to hold drain fitting before opening tee or damage to tank threads can occur. Open drain tee (A) while holding drain fitting with wrench (B). RXA0078828 —UN—04FEB05 Drain fuel from tanks until clean fuel appears from tank. Hold fitting with wrench to close drain tee. A—Drain Tee B—Wrench OURX935,00002C3 1919JUN081/1 Checking the ManuallyOperated Hitch for Wear RXA0095855 —UN—29AUG07 RXA0095856 —UN—29AUG07 A—Diameter (A) B—Diameter (B) CAUTION: Parts that have reached or exceeded their wear limit must be replaced with new parts. Check diameter (B) of the receiver hole. Check diameter (A) of the hitch pin.
Specification Top and bottom receiver holes (measured in direction of travel)—Wear limit or maximum permitted diameter........................................................... 35.0 mm (oval) 1.38 in. (oval) Specification Hitch pin—Wear limit or minimum diameter........................................................................... 29.0 mm 1.14 in. Continued on next page OURX935,0000329 1913JUN081/2 1028 122208 PN=268