John Deere Omar287594 — Check Remote Controlled Hitch for Wear

250 Hour Service LX1042085 —UN—26FEB07 LX1042084 —UN—26FEB07 Gap "X" Bearing Play "Y" Replace retaining wire if: IMPORTANT: If bearing play (Y) is greater than 1.5 mm (0.059 in.) the entire trailer hitch must be replace with a new hitch. Gap (X) is greater then 3 mm (0.118 in.) OURX935,0000329 ­19­13JUN08­2/2 Check Remote Controlled Hitch for Wear CAUTION: Parts that have reached or exceeded their wear limit must be replaced with new parts. Check diameters (A and B) of the hitch pin Specification Ball­shaped hitch pin—Wear limit or minimum diameter (B) ..................................................... 36 mm 1.42 in.

Ball­shaped hitch pin—Wear limit or minimum diameter (C)..................................................... 27 mm 1.06 in. RXA0095843 —UN—29AUG07 Check diameter (C) of the receiver hole. Specification Bottom receiver hole (in direction of travel)—Wear limit or maximum permitted diameter........................................................... 34 mm (oval) 1.33 in. (oval) RXA0095844 —UN—29AUG07 Check thickness (D) of wear plate. Specification Wear plate—Wear limit or maximum permitted thickness (E).................................................... 6 mm 0.24 in.

A—Hitch Pin Diameter (A) B—Hitch Pin Diameter (B) C—Receiver Diameter (C) D—Wear Plate Thickness (D) Continued on next page OURX935,000032A ­19­13JUN08­1/2 102­9 122208 PN=269