John Deere Omar287594 — Check Tow-Hook on Pick-Up Hitch for Wear

250 Hour Service Check for Wear at Ball­Type Tow Hitch CAUTION: Parts that have reached or exceeded their wear limit must be replaced with new parts. Check gap (A) at catch. RXA0095865 —UN—29AUG07 Specification Gap at catch—Maximum permissible clearance...................................................... 4.0 mm 0.16 in. Check diameter (B) of the ball. Specification Ball diameter—Wear limit or minimum diameter........................................................... 78.0 mm 3.07 in. A—Gap B—Ball Diameter OURX935,000032C ­19­12JUN08­1/1 Checking Swinging Drawbar for Wear CAUTION: Parts that have reached or exceeded their wear limit must be replaced with new parts.

RXA0095851 —UN—29AUG07 Check diameter (A) of the pin. Specification Swinging drawbar, pin—Wear limit or minimum diameter....................................................... 29.5 mm 1.16 in. Check diameter (B) of the pin receiver hole. Specification Top and bottom receiver holes (measured in direction of travel)—Wear limit or maximum permitted diameter........................................................... 35.0 mm (oval) 1.38 in. (oval) RXA0095853 —UN—29AUG07 A—Pin Diameter B—Receiver Hole Diameter OURX935,000032D ­19­12JUN08­1/1 102­11 122208 PN=271