1500 Hour Service RXA0098957 —UN—03SEP08 A—Cap Screws B—Bottom Drain Plug AutoPowr Transmission Cover And With CU Hydro Control Valve and Screen Plug Shown 7. Remove filter screen and wash carefully in solvent. Blow dry with compressed air before reinstalling screen. Drain and Fill Capacity * MFWD Axle: 8. Remove four cap screws (A) and cover. .. System ......................................................... 150 L (40 gal) .. System (Less Clean Oil Reservoir) ....................... 117 L (30 gal) 9. Remove bottom drain plug (B), then using a work light inspect the filter through the bottom drain plug opening. Independent Link Suspension Axle: ..
System ......................................................... 160 L (42 gal) 10. If the filter screen appears clean, reinstall plug and proceed with step 11. .. System (Less Clean Oil Reservoir) ....................... 127 L (34 gal) * Capacities are average values and can vary between oil changes If the filter is dirty, see Cleaning Transmission Filter Screen in this section. 13. Start and operate engine several minutes. Check for leaks. Stop engine and recheck oil level after a minimum of five minutes. Add oil as necessary. 11. Reinstall plugs after oil has drained. 12. Refill with Transmission/Hydraulic oil specified in Fuels, Lubricants, and Coolant section.
OURX935,00004B4 1904SEP083/3 1063 122208 PN=283