1500 Hour Service Cleaning Transmission Filter Screen (AutoPowr Only) IMPORTANT: For tractors with AutoPowr refer to your John Deere dealer with any question you have on removing hydro control valve and/or transmission filter screen. RXA0083068 —UN—03AUG05 When working with hydraulic components, cleanliness is essential and ANY FOREIGN MATERIAL (DIRT) can damage equipment! Clean area around the hydro control valve thoroughly with steam cleaner prior to removing it, then make sure valve is clean before installing it. On AutoPowr transmissions, do not remove screen unless it is dirty. Remove Connectors IMPORTANT: Removing hydro control valve requires a 1 1/4 in.
(deep broach) deep well socket to avoid damaging control valve. RXA0083064 —UN—03AUG05 1. Remove AutoPowr transmission bottom cover shield if not already removed. IMPORTANT: Make sure wiring harness (B) is disconnected and kept out of the way of any dripping oil before removing screen access plug. Oil in wiring harness connectors will damage equipment. 1 1/4 in. Deep Well Deep Broach Socket 2. Remove connectors (A) on control valves then tuck wiring harness out of the way. NOTE: Make sure 1 1/4 in. deep well socket has a broach (C) deep enough that control valve is not damaged when it is removed. RXA0083072 —UN—03AUG05 3. Using a 1 1/4 in.
deep broach deep well socket, remove CU hydro valve (D). 4. Remove screen access plug (E) at front of transmission, then remove screen (F). Remove Plug NOTE: For tractors with Independent Link Suspension, carefully flex Independent Link Suspension tube (G) down enough to remove screen (F). 5. Flex steel tube across the front of the screen slightly to allow screen to be pulled out of transmission case. 6. Remove filter screen and wash carefully in solvent. Blow dry with compressed air before reinstalling screen. RXA0086863 —UN—21FEB06 7. Install screen in transmission, front screen plug, and bottom drain plug. 8. Reinstall control valve and wiring harness connectors. 9.
Reinstall all drain plugs after oil has drained. 10. Refill with transmission/hydraulic oil specified in Fuels, Lubricants, and Coolant section. A—Connectors B—Wiring harness C—Deep Well Deep Broach Socket D—Hydro Valve E—Screen Access Plug F—Screen G—Independent Link Suspension Tube Continued on next page OURX935,00004B5 1903SEP081/2 1064 122208 PN=284