John Deere Omar287594 — Draining, Flushing and Refilling Cooling System

2000 Hour Service Check Cooling System for Leaks 1. Raise hood. 2. Check radiator for leaks or damage. 3. Slowly turn de­aeration tank cap (A) to relieve pressure. Remove cap. RXA0078826 —UN—04FEB05 4. Attach radiator tester (B) to filler neck. 5. Pressurize system. Specification Radiator—Pressure Test ................................................. 60 kPa (0.6 bar) (9 psi) Remove De­aeration Tank Cap 6. If pressure drops immediately, or will not build pressure, have John Deere dealer check and repair system. 7. Test and/or replace de­aeration cap whenever cooling system is flushed. Use suitable equipment or see your John Deere dealer for testing equipment. RXA0079505 —UN—07MAR05 NOTE:

Cap gasket should be visually checked for sealing effectiveness. A good functioning gasket should have the imprint of the mating surface with no apparent scratches or leak paths. If gasket is damaged, replace cap and test new cap. Attach Radiator Tester NOTE: Cap should hold pressure within specifications. Relief occurs at top of range. A—De­aeration Tank Cap B—Radiator Tester NOTE: Replace cap if test result is out of specifications. 8. Pressurize cap. 9. Remove tester and install radiator cap. Specification Radiator Cap—Pressure Test.......................................... 60–80 kPa (0.6–0.8 bar) (9–12 psi) 10. Close hood. OURX935,00004A7 ­19­12DEC08­6/6 107­6 122208 PN=296