John Deere Omar287594 — Removing and Installing Fan Belt

General Services A I H B F A B C D C D RXA0085936 —UN—18JAN06 RXA0085937 —UN—18JAN06 G E E Auxiliary Drive Belt Installed on Tractor Without Air Brake Auxiliary Drive Belt Installed on Tractor With Air Brake A—Square Hole B—Tensioner Arm C—Air Conditioner Pulley D—Alternator Pulley E—Auxiliary Drive Pulley F—Air Brake Pulley G—Idler H—Tension Arm Mounting Hole Tension Arm Mounting Hole IMPORTANT: Keep tension off belt during removal. 7. Remove belt from auxiliary drive pulley (E). 2. Insert 1/2 in. drive tool into square hole (A) in tensioner arm (B). 8. Discard old belt. 3. Push up on tool handle to relieve tension on drive belt. NOTE:

There is minimal clearance between transmission auxiliary drive pulley and tractor frame. Do not damage new belt when installing. 4. Remove belt from air conditioner pulley (C). NOTE: Tractors with air brake have tension arm installed in tension arm hole (H). Tractors without air brake have tension arm installed in tension arm hole (I). 9. Install new belt to auxiliary drive pulley, then on the alternator pulley. 10. For tractors with air brake, install belt on air brake pulley and idler. 5. For tractors with air brake only, remove belt from air brake pulley (F) and idler (G). 11. Install belt on air conditioner pulley. 6. Remove belt from alternator pulley (D). 12.

Remove 1/2 in drive tool restoring tension on new belt. NOTE: Clearance between transmission auxiliary drive pulley and tractor frame is minimal. 13. Install shield and close hood. OURX935,000030E ­19­12JUN08­2/2 110­5 122208 PN=302