EVERY 2000 HOURS SERVICE k. AIR DRYER If the air dryer is installed as an op- tion, clean element of the air dryer. I_ Close I- Open Stop the machine on level ground, lower the blade to the ground, and stop the engine. Pull drain lever (I) of the air tank (wet) to release the air inside the tank. Remove spring (5) and filter cup (61, then remove element (7). After cleaning the element, install it inside the case, then install filter cup (61, spring (5), and cover (3) in order. Remove hose (2) between the air tank and air dryer. Remove mounting bolts (4) of top cover (3) of the air dryer.
A The top cover is being pushed by the force of a spring, so when re- moving the bolts, hold the cover down and remove carefully. When assembling, replace pack- ing (8) and gasket (9). When installing top cover (31, push down the cover and tighten uni- formly. Clean the element every 2000 hours or every 6 months, -114-