EVERY 2000 HOURS SERVICE g. TURBOCHARGER Excessive carbon or oil sludge ad- hering to the turbocharger blower impeller may deteriorate normal per- formance of the turbocharger and may sometimes damage it. Contact your Komatsu distributor. 1. Remove the turbocharger oil supply tube and the drain tube. Then, remove the connection area of the intake manifold and the blower housing so that the blower impeller can be seen. 2. Using light oil, wash the impeller to eliminate carbon adhered on the surface. Do not use wire brushes or the like to prevent damage to the impeller surface. 3. Pour light oil through the tur- bocharger oil filer.
Turn the blower impeller several turns so that foreign materials such as sludge can be washed away. 4. Using your fingers, turn the irn2 peller vigorously for one revolu- tion or more. If there is no sigh of interference or catching, the im- peller is normal. If the impeller seems to turn heavily, contact your Komatsu distributor to ask for repair or replacement. 5. If the impeller is found normal after this check, supply engine oil h. ALTERNATOR AND STARTING MOTOR As the hours of engine employ- ment indicate that the brushes are already worn out, you should request repair from a Komatsu distributor. * They should be repaired every 1000 hours, if the machine is frequently operated at night.
i. ENGINE VALVE CLEARANCE Ask Komatsu distributor to check engine valve clearance be- cause special tools should be used. j. BRAKE DISC Ask Komatsu distributor to check and repair brake disc. to the turbocharger. - 113-