WHEEL DOZER’S WORK WHEEL DOZER’S WORK DITCHING For ditch excavation, tilt the blade. Ground can be dug effectively by a tilted blade. DOZING A wheel dozer transports dirt in a forward direction. Slope excavation can always be most effectively car- ried out by proceeding from the top A When carrying out operations, push the objects from directly in front. Avoid applying loads to only SMOOTHING Uneven ground surfaces remain- ing after digging can be levelled off by fine operation of blade. The basic method is to operate the machine at low speeds with the blade fully loaded with soil and sand.
A flat finished surface is also possible by slowly backing the machine with the blade “floating” so it is dragged across the surface. However, avoid this on rocky or stony ground, as it may damage the blade. downward. one side of the blade. A Avoid hitting hard bedrock or hitting at an angle with force. FELLING AND UPROOTING A tree, 10 to 30 cm in diameter, can be felled by giving 2 or 3 pushes with the blade held off the ground. Next, back the machine and lower the blade to cut into the earth. Break the roots and push them for- ward while digging. Never allow the machine to butt against, or give strong impact to a tree by operating at high speeds.
This is dangerous, and also reduces the life of the machine. w-03704 -61 -