Komatsu — HANDLING THE TIRES

HANDLING THE TIRES TIRE PRESSURE Measure the tire pressure before starting operations, when the tires are cool. If the inflation pressure is too low, it causes overload on the tires; if the inflation pressure is too high, the tire may be cut or may burst under shock. Therefore adjust the inflation pressure to the values in the following table. For operations on normal road surfaces: . . . . . . . . . . . . . . . . . . . . High end of range in air pressure chart Stockpile operations on soft ground: . . . . . . . . . . . . . . . . . . . . . Average pressure in air pressure chart Operationsonsand: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Low end of range in air pressure chart If the deflection of the tire is excessive, raise the inflation pressure within the limits given in the table to give a suitable deflection (see deflection ratio). Stockpile operations mean the loading of sand and other loose materials. Inflating tires Connect the air charge hose to air pickup (1) to inflate the tires. w-03705 - 63 -