Komatsu — HANDLING OF BATTERY

HANDLING OF BATTERY A When connecting the cables, never contact the positive (+I and negative (- 1 terminals. A Make sure that the booster cable connections are correct. Connect the booster cable to the engine block as far as possi- ble from the battery. After the engine has started, the booster cables should be dis- connected in the reverse order in which they were connected. 1. Disconnecting the booster cables I) Disconnect the clip of booster cable B from the engine block which was started. 2) Disconnect the other clip from the negative (-1 terminal of the running engine. 3) Disconnect the clip of booster cable A from the positive t-t) terminal of the running engine.

4) Disconnect the other clip from the positive (+I terminal of the engine which was started. 3. Starting engine 1) Turn the starting switch to START position and start up the engine. 2) If the engine doesn’t start at first, try again after 2 minutes or so. Battery for Battery for engine which was started running engine @ 0 Engine block which was started. s -7o- ww -01309