COLD WEATHER OPERATION COLD WEATHER OPERATION PREPARATION FOR LOW TEMPERATURE If the temperature becomes low, it COOLANT After cleaning inside of the cooling Care in using Antifreeze Use a Permanent Antifreeze (ethyl- and the coolant may freeze, so do as becomes difficult to start the engine, to prevent the coolant from freezing system, add antifreeze to the coolant ene glycol mixed with corrosion in- hibitor, antifoam agent, etc.) meeting follows. when the machine is not being used. the standard requirements as shown FUEL AND LUBRICANTS Change to fuel and oil with low * For details of the antifreeze mix- ture when changing the cooling change of coolant is required for a below.
With permanent antifreeze, no viscosity for all components. For details of the specified viscosity, water, see WHEN REQUIRED. year. If it is doubtful that an available antifreeze meetsthestandard require- AND LUBRICANTS. see the TABLE OF FUEL, COOLANT ments, ask the supplier of that anti- freeze for information. Standard requirementsforpermanent antifreeze l SAE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J1034 l FEDERAL STANDARD ,.................,................ O-A-548D -7l-