PRECAUTIONS FOR MAINTENANCE l After replacing oil, filter element l After greasing up, always wipe off l When check an open cover there is circuit. or strainer, bleed the air from the l When changing the oil or filter, the old grease that was forced out. a risk of dropping things in. Before removing the covers to inspect l When the strainer is located in the oil filler, the strainer must not be check the drained oil and filter for any signs of excessive metal par- cover, empty everything from your pockets. Be particularly careful to removed while adding oil. ticles or other foreign materials, remove wrenches and nuts.
l When adding oil or checking the oil level, check that the oil is at the l When removing parts containing O-rings, gaskets or seals, clean the l When working on the sea shore, carefully clean all electrical equip- When adding oil or fuel, do not let correct level. mounting surface and replace with new sealing parts. corrode. ment to ensure that is does not the oil or fuel overflow. l When washing the machine, en- l Before working in muddy water, l If oil or water are spilled, always wipe it up. Spilled oil or water may the alternator. sure that water does not get onto ous plugs, valves, are properly rain or snow, check that the vari- cause fire.
cause people to slip; spilled oil may l Special measuring apparatus is needed for testing hydraulic pres- work, wash the machine, then screwed up. Upon completion of If soil is piled on top of a place sure. check the various parts of the where fuel has been spilled, re- move the soil. l Thoroughly wash the machine. In particular, be careful to clean the machine for cracking, scratching, loose or missing nuts and bolts. filler caps, grease fittings and the area around the dipsticks. Be care- Also, oil and grease the various parts of the machine. the system.
ful not to let any dirt or dust into l When working on rocky ground, be careful of damage to the under- carriage, loose nuts and bolts, cracks, wear and other damage. - 82 -