mercedes-benz — Mercedes-Benz Automated-Manual Transmissions Troubleshooting Guide

Meritor WABCO Pneumatic Antilock Braking System (ABS) 42.00 ABS System Troubleshooting 3. At the PLC filter, connect one lead of the DMM to the green wire (at the 2-pin connector with the green and yellow wires) and the other lead to one of the blue wires (at the 2-pin connector with the two blue wires). Measure the capacitance. that has the two blue wires) and connect the other lead to the ground where the white wire terminates. Measure the capacitance. If the reading is 9.91 to 11.91 µF, the PLC filter is functioning properly. If the reading is 4.8 to 7.2 µF, go to the next step.

If the reading is less than 9.91 or more than 11.91 µF, check and clean the ground connection where the white wire termi- nates and retest. If the reading is still un- satisfactory, one or more of the internal capacitors is faulty. This may affect PLC functionality and/or noise in the electrical system. Replace the PLC filter. If the reading is less than 4.8 or more than 7.2 µF, one or more of the internal capaci- tors is faulty. This may affect PLC function- ality and/or noise in the electrical system. Replace the PLC filter. 4. At the PLC filter, connect one lead of the DMM to one of the blue wires (at the 2-pin connector Business Class M2 Workshop Manual, Supplement 2, June 2002 300/18