Meritor Cam-Master Q Plus Brakes 42.01 General Information General Information Principles of Operation Meritor Q Plus brakes are standard for both front and rear axles. These Cam-Master ® brakes are air- actuated, cam-operated, foundation brakes. The main components in each brake assembly (wheel end) include the following: When the brake pedal is depressed, compressed air enters the brake chamber, causing the diaphragm to move a pushrod assembly. The pushrod turns the slack adjuster and brake cam- shaft. As the camshaft turns, the S-type cam head forces the brake shoes against the brake drum and braking occurs.
an S-head camshaft a brake spider a camshaft-and-chamber bracket When the brakes are released and air is exhausted from the brake chamber, the actuator return spring (within the brake chamber) and the brake shoe return spring return the camshaft, brake shoes, slack ad- juster, and pushrod to their released positions. two brake shoe and lining assemblies two retaining springs a return spring two anchor pins The S-head camshaft transfers braking force from the slack adjuster to the brake shoe assemblies. The camshaft passes through the brake spider and camshaft-and-chamber bracket before connecting to the slack adjuster. See Fig. 1 .
Each brake shoe is mounted on an anchor pin on the brake spider and is controlled (moved) by either the outward braking force of the S-head camshaft or the inward restoring force of the return spring. The heavy-duty, double-web brake shoes have notches on one end of the webs that fit on the an- chor pins. Two retaining springs secure the brake shoes to each other near the anchor pins, creating a hinge for brake-shoe movement. This design makes quick-change brake service possible. Meritor steer axles have seven 0.656-inch-diameter holes for attaching the spider to the axle flange.
An oversized eighth hole (0.687-inch diameter) in the axle flange is for an antilock brake system (ABS) wheel speed sensor bushing. See Fig. 2 . The eighth hole is in the 10 or 2 o’clock position, depending on which side of the axle is viewed. Q Plus MX500 brakes are extended maintenance brakes. These brakes can be identified by an identifi- cation tag affixed to the brake shoe. An additional identification tag is affixed to the brake camshaft- and-chamber bracket (on top of the plugged grease hole). MX500 brakes and Meritor automatic slack adjusters do not have grease fittings. Business Class M2 Workshop Manual, Supplement 0, January 2002 050/1