Meritor WABCO Hydraulic Antilock Braking System (ABS) 42.26 Troubleshooting Circuit Wire Numbers and Descriptions, "D" Version Pin Connector Pin Number Vehicle Wire Number WABCO Circuit Description 1 Not Used 2 Not Used 3 377LR+ Left Rear Sensor 4 377RF– Right Front Sensor 5 377LF+ Left Front Sensor 12-Pin Green X3 6 377RR+ Right Rear Sensor 7 377RR– Right Rear Sensor 8 377LF– Left Front Sensor 9 377RF+ Right Front Sensor 10 377LR– Left Rear Sensor 12 Not Used 11 Not Used Table 2, Circuit Wire Numbers and Descriptions, "D" Version Vehicle Wire Number Pin Number Circuit Description ABS Modulator Assembly Pin Connectors Vehicle Wire Number Pin Number Circuit Description ABS Modulator Assembly Pin Connectors 1 376LRO Left Rear Outlet Valve 2 378LRI Left Rear Inlet Valve 10 378RRO Right Rear Outlet Valve 3 Not Used 11 378RRI Right Rear Inlet Valve 4 378RFI Right Front Inlet Valve 12 378LFI Left Front Inlet Valve 13 378LFO Left Front Outlet Valve 5 378RFO Right Front Outlet Valve 1 GND Pump Ground 6 Not Used 2 376A Pump Power 7 Not Used 8 GNDE Ground Table 3, ABS Modulator Assembly Pin Connectors 9 Not Used Troubleshooting Tables J1587 Fault 136-001 Left Front Wheel Sensor MID SID FMI Problem Test Test Result Action 1.
Adjust the sensor. Check the AC voltage across Pins 5 and 8 of the green X3 ECU connector (Circuits 377LF+ and 377 LF–) while rotating the left front wheel 30 rpm. Voltage greater than 0.2 VAC Sensor adjustment solved the problem. Clear the stored faults and drive the vehicle 4 mph (6 km/h). 136 001 01 Incorrect sensor air gap Voltage less than 0.2 VAC Check for excessive wheel bearing end play. Repair as necessary. Business Class M2 Workshop Manual, Supplement 4, March 2003 300/9