Meritor WABCO Hydraulic Antilock Braking System (ABS) 42.26 Troubleshooting J1587 Fault 136-030 Recirculation Pump Relay MID SID FMI Problem Test Test Result Action The ABS pump relay (located in the chassis harness, near the ABS valve) may be intermittently sticking. Try a new relay and verify that the problem is solved. Pump relay sticks, pump continues to run when ECU deactivates the relay 4. If the fault is active, disconnect the black X2 connector from the ECU. With the ignition ON, check to see if the recirculation pump is running. Pump OFF 136 030 07 NOTE: The problem may be intermittent and a new relay may be required to correct the fault.
The ABS pump relay (located in the chassis harness, near the ABS valve) is sticking. Replace the relay. Pump ON Table 11, J1587 Fault 136-030 Recirculation Pump Relay Business Class M2 Workshop Manual, Supplement 4, March 2003 300/17