Bulkhead Module 54.12 Specifications See Fig. 1 for an illustration of the Bulkhead Module (BHM) Harness Connections. See Fig. 2 for maximum allowable current load for the full BHM output pins (part numbers A06-40959- 000 and A06-40959-002). 20A 12A See Fig. 3 for an illustration of the BHM with pinout assignments and harness connections. 12A Combined 12A 12A Combined 4 12A Combined 5 6.7A Combined 3 6.7A Combined 2 6 6.7A Combined 1 7 6.7A 6.7A 6.7A 6.7A 8 6.7A Combined 09/26/2001 1. B1, Forward Chassis Harness 2. B2, Engine Harness 3. B3, Frontwall Harness 4. B4, Frontwall Harness 5. Frontwall 6. B5, Dash Harness 7. B6, Dash Harness 8.
B7, Dash Harness f543870 6.7A 6.7A 6.7A 6.7A 6.7A 11/24/2004 f544533 See Note A below. NOTE A: Pulse Width Modulated Output Fig. 1, Bulkhead Module Harness Connections Fig.
2, Maximum Allowable Current Load for the Full- Feature Bulkhead Module Output Pins (part numbers A06-40959-000 and A06-40959-002) Business Class M2 Workshop Manual, Supplement 10, September 2006 400/1 B5.F − Cigar Lighter Output B3.E − Horn B5.E − SPARE (Utility Light/Spotlight) B4.M − SPARE (Utility Light/Spotlight) B5.G − SPARE (Ignition) B5.H − Panel Lamps B7.A1 − Panel Lamps (Smart Switch) B4.F − SPARE (Left Heated Mirror) B4.E − SPARE (Right Heated Mirror) B6.A9 − Accessory (HVAC) B6.A10 − Accessory (Radio) Module B5.A − Battery (Dome Lamps) B7.A12 − Battery (Smart Switch) Bulkhead B6.A8 − Ignition (VCU) B2.K − Ignition (Engine) B1.P − Ignition (ABS) B2.L − Ignition (Trans) B1.F − Fuel Water Sensor Power B5.D − Wake Up (Instrument Cluster) B5.B − Dome Lamps Switched B1.L − Left High Beam B1.R − Left Low Beam B5.C − Clearance Lamps B1.K − Tail/License Plate/Trailer Relay B3.F − Wiper High B3.H − Wiper Low B3.G − Washer Pump B2.M − AC Clutch B4.B − Starter Relay (Crank)