daewoo Solar 140LC-V — Engine Shut Down

5. Set engine speed control dial to “HIGH IDLE” (Figure 21). 6. Repeat Step 4 for 5 minutes. If working speeds continue to be slow, continue to operate, but use extreme caution because the machine function may be erratic. 7. Check for clearance and fully raise the front attachment. Slowly swing clockwise 3 revolutions. Slowly swing counterclockwise 3 revolutions. 8. Travel forward and reverse at low speed for two revolutions of the drive sprocket. HAOB550L Figure 21 ENGINE SHUT DOWN NOTE: Allow engine to idle for 3 - 5 minutes before shutting down the engine. If not allowed to idle, heat surge may develop which will damage the engine. Allowing the engine to idle will dissipate heat.

ARO0460L Figure 22 1. Park excavator on level and firm ground. 2. Lower front end attachment to ground and make sure all operating controls are in "NEUTRAL." HAOB920L Figure 23 3-12 Operation 022-00058E Operation and Maintenance Manual