3. Set safety lever on "LOCK" position by pulling it up (Figure 24). HAOA390L Figure 24 4. Set engine speed control dial to “LOW IDLE” (Figure 25). Allow engine to idle for 3 - 5 minutes. HAOB290L Figure 25 5. Shut down engine by turning key to "O" (OFF) position (Figure 26). 6. Remove key from starter switch. CHECK AND CONFIRMATION AFTER STOPPING ENGINE 1. Repair excavator, if there are any coolant or oil leaks. 2. Inspect front attachment and under carriage for abnormal appearances. Correct any problems. HAOC340L Figure 26 3. Fill fuel tank. 4. Get rid of any accumulated flammable materials such as leaves and paper etc. in engine compartment. 5. Clean all mud, etc.
from undercarriage and tracks. Make sure that all steps and hand holds are clean, and that the operator's compartment is clean. 022-00058E Operation and Maintenance Manual Operation 3-13