daewoo Solar 140LC-V — Safety Lever

SAFETY LEVER WARNING! When stopping engine or leaving the operator's seat, "LOCK" the safety lever, otherwise, a serious accident may occur by accidental movement of travel and work levers (joysticks). Whenever leaving the operator's seat, make sure the engine is shut down and the safety lever is "LOCKED." Be careful not to move the work levers (joysticks) when raising up or pushing down the safety lever. 1. Pull safety lever (Figure 27) up to allow left-hand control console to raise into the "LOCKED" position. Make sure that the safety lever is "LOCKED" into the raised (up) position.

When safety lever is in the "LOCKED" position, the front attachment, swing and travel movement will be disabled even though a lever is moved. NOTE: Lower bucket (front attachment) to ground. Place all control levers in "NEUTRAL" and shut down engine. HAOA390L Figure 27 2. Set safety lever (1, Figure 28) on "RELEASE/UNLOCK" position, by pushing it down before starting work. NOTE: When the engine is not running, but the safety lever is "RELEASED" and the starter key is tuned "ON," moving the work levers (joysticks) may result in movement. The charged accumulators in the system will provide pilot pressure for control valve spool movement.

1 ARO0450L Figure 28 3-14 Operation 022-00058E Operation and Maintenance Manual