Boost Mode 1. Power boost switch is used to gain maximum digging force. 2. The power boost is activated while the right side button is being pressed on top of the right-hand work lever (joystick). NOTE: The power boost mode does not affect forward and reverse travel. Do not use this switch for more than 10 seconds. ARO0110L Figure 47 RIGHT-HAND WORK LEVER (JOY- STICK) WORK LEVERS (JOYSTICKS) (ISO STYLE) WARNING! Check surrounding area before swinging. When operating a lever while in auto idle, do it carefully, because the engine speed will increase rapidly. NOTE: When starting work, move work levers (joysticks) slowly and check movement of swing and front attachment.
This equipment is manufactured using the lever configuration described in ISO standards. Do not change valving, hoses, etc., that would change this standard. The boom, arm and bucket movements and swing direction of work levers (joysticks) are as follows: 1 5 3 4 7 8 2 6 ARO0461L Figure 48 3-24 Operation 022-00058E Operation and Maintenance Manual