daewoo Solar 140LC-V — Operation at High Altitudes

5. Protect machine from dust and sand as much as possible. Park machine under cover or protect with tarpaulin to keep dust and sand from damaging unit. OPERATION IN RAINY OR HUMID CONDITIONS Operation under rainy conditions is similar to that as in extreme heat procedures listed previously. 1. Keep all exposed surfaces coated with preservative lubricating oil. Pay particular attention to damaged or unpainted surfaces. Cover all paint cracks and chip marks as soon as possible to prevent corrosive effects. OPERATION IN SALT WATER AREAS The corrosive effect of salt water and salt water spray is very extensive. When operating in salt water areas, observe the following precautions. 1.

When exposed to salt water, dry machine thoroughly and rinse with fresh water as soon as possible. 2. Keep all exposed surfaces coated with preservative lubricating oil. Pay particular attention to damaged paint surfaces. 3. Keep all painted surfaces in good repair. 4. Lubricate machine as prescribed on lubrication chart on machine or "Periodic Service Table and Chart" Section 4, in this manual. Shorten lubricating intervals for parts subject to exposure to salt water, if found to be necessary. OPERATION AT HIGH ALTITUDES Normally, operation of machine at high altitudes will be as outlined in extreme cold.

Before operating at high altitudes, engine fuel and air mixture may have to be adjusted according to appropriate engine manual. 1. Check engine operating temperature for evidence of overheating. The pressure cap on radiator must make a perfect seal to maintain coolant pressure in the system. 022-00058E Operation and Maintenance Manual Operation 3-41