SERIAL NUMBERS There are two serial number plates attached to the body of the excavator. Please make note of these numbers and their locations. These will be required whenever warranty service work is requested. Machine Serial Number The machine serial number plate (Figure 3) is on the right side of the cab on the outside. Engine Serial Number Figure 3 The engine serial number is stamped on the rear left side of the engine block, above the starter. Additional engine information is described on a label (Figure 4) on the rocker cover. Figure 4 SAFETY PRECAUTIONS 1.
Make sure to lock out the hydraulic controls and post a notice (Warning Tag) that the machine is being serviced to prevent any unauthorized operation. 2. Make sure to clean up any fluid spills, especially around the engine. 3. Inspect all fuel lines to make sure that fittings, lines, filters and O-rings, etc., are tight and are not showing signs of wear or damage. 4. If the inspection or test procedure requires that the engine be running, make sure to keep all unauthorized personnel away from the machine, and that all industry standard safety precautions are followed. 4-2 Inspection, Maintenance and Adjustment 022-00058E Operation and Maintenance Manual