daewoo Solar 140LC-V — Grease Boom, Arm and Front Attachment Pins

50 HOUR / WEEKLY SERVICE PERFORM ALL DAILY SERVICE CHECKS GREASE BOOM, ARM AND FRONT ATTACHMENT PINS Grease every 10 hours for first 100 hours and every 50 hours thereafter. NOTE: If the unit has been running or working in water the front attachment should be greased on a 10 hour / daily basis. Position machine as shown below and lower the front attachment to the ground and shut down engine. Press the grease fitting and inject grease with the grease gun on the marked point. After injection, clean off the old grease that has been purged. HAOC150L Figure 31 A. BOOM CYLINDER FOOT PIN (2 POINTS) B. BOOM FOOT PIN (2 POINTS) C. BOOM CYLINDER ROD PIN (2 POINTS) D. ARM CYLINDER FOOT PIN (1 POINT) E.

BOOM ARM JOINT PIN (2 POINTS) F. ARM CYLINDER ROD (1 POINT) G. BUCKET CYLINDER FOOT PIN (1 POINT) H. ARM LINK JOINT PIN (2 POINTS) I. LINK JOINT PIN (2 POINTS) J. ARM BUCKET JOINT PIN (2 POINTS) K. BUCKET LINK JOINT PIN (1 POINT) L. BUCKET CYLINDER ROD (1 POINT) 4-22 Inspection, Maintenance and Adjustment 022-00058E Operation and Maintenance Manual