START ENGINE, CHECK STARTING ABILITY, AND OBSERVE EXHAUST COLOR AT START-UP AND AT NORMAL OPERATING TEMPERATURE. LISTEN FOR ANY ABNORMAL SOUNDS CHECK OPERATION OF ALL CONTROLS IMPORTANT Cold weather operation requires that the operator fully warm up the hydraulic oil before beginning machine operation. Follow all warm up instructions listed in the Operating Instruction section of this manual. Make sure to cycle oil through all of the components, including all cylinders, both travel motors and the swing motor. Cold hydraulic oil in the lines and components needs to be warmed before beginning full operation. If this is not done, damage to the cylinders or hydraulic motors can occur. 1.
With the engine at rated speed, operate all of the controls. 2. Follow cold weather hydraulic system warm-up procedures. 3. Note any slow operations or unusual movements. Determine the cause and repair the fault before operating. 022-00058E Operation and Maintenance Manual Inspection, Maintenance and Adjustment 4-21