CHECK AIR INTAKE SYSTEM CAUTION! Hot engine components can cause burns. Avoid contact with hot engine components 1. Park the machine on a level surface, lower the attachment to the ground, set safety lever to "LOCK" position, and shut down engine. HAOA050L Figure 29 2. Check the engine intake hose, and hose bands for damage and tightness. 3. If damaged, wrinkled or loose, replace or retighten or contact your nearest Daewoo dealer. IMPORTANT Severe engine damage will result from running with unfiltered air. Do not operate engine if any leaks or defects are found on air intake system. Figure 30 INSPECT SEAT BELT FOR PROPER OPERATION INSPECT THE STRUCTURE FOR CRACKS AND FAULTY WELDS 1.
During the daily walk-around inspection and when greasing the machine, look for any visible damage to the machine. Repair or replace any damaged parts before operating the machine. CHECK THE OPERATION OF ALL SWITCHES 1. Verify the working condition of all switches before starting the engine. CHECK THE OPERATION OF ALL EXTERIOR LIGHTS, HORN AND CONTROL CONSOLE INDICATOR AND MONITOR LIGHTS 1. Turn the engine starter switch to "ON" position and observe all of the indicator lights. 2. Restore operation of any light bulbs that do not turn "ON" at this time. 3. Sound the horn. Repair or replace if required. 4. Turn "ON" and inspect all exterior work lights.
Replace any monitors, burned out bulbs or cracked or broken housings or lenses. 4-20 Inspection, Maintenance and Adjustment 022-00058E Operation and Maintenance Manual