daewoo Solar 140LC-V — Inspect Engine Fan Blade

INSPECT THE BUCKET TEETH AND SIDE CUTTERS FOR SIGNS OF WEAR 1. On a daily basis, inspect the bucket teeth to make sure that tooth wear or breakage has not developed. 2. Do not allow the replaceable bucket teeth to wear down to the point that the bucket adapter is exposed. See Figure 27. NOTE: These instructions are only for Daewoo OEM buckets. If you are using other manufacturers' buckets, refer to their specific instructions. Figure 27 1. POINT, 2. ADAPTER & 3. PIN INSPECT ENGINE FAN BLADE WARNING! Personal injury can result from a fan blade failure. Never pull or pry on the fan. This can damage the fan blade(s) and cause fan failure. NOTE:

Manually rotate the crankshaft by using a wrench on the accessory drive pulley nut. Figure 28 1. An inspection of the cooling fan is required daily. Check for cracks, loose bolts, bent or loose blades, and for contact between the blade tips and the fan shroud. Check the fan to make sure it is securely mounted. Tighten the bolts if necessary. Replace any fan that is damage. 022-00058E Operation and Maintenance Manual Inspection, Maintenance and Adjustment 4-19