Prime the Fuel System If engine does not start, the fuel system may need priming. Prime the fuel system using the following procedure; 1. Loosen plug (Figure 64) on top of fuel filter head. 2. Unscrew and pump the hand operated primer pump (Figure 65) by the fuel injection pump. Pump primer until fuel is present at plug hole in fuel filter head. Figure 64 3. Tighten plug in fuel filter head. 4. Continue to pump primer pump until a strong resistance is felt. Screw the primer pump knob back into housing. 5. Start engine and look for signs of leaks. 6. Repeat procedure if necessary. Figure 65 4-38 Inspection, Maintenance and Adjustment 022-00058E Operation and Maintenance Manual