4,000 HOUR / BIENNIAL SERVICE MAJOR PARTS - PERIODIC REPLACEMENT To ensure safe operation and work, perform periodic inspections. Also, to increase safety, replace the following parts. These parts are the ones most often subjected to abrasion, heat and fatigue. Exchange these parts with new ones at the designated time intervals, even if the old parts look good. Always replace all related parts such as gaskets and O-rings. Use only original equipment manufacturers parts.
022-00058E Operation and Maintenance Manual Inspection, Maintenance and Adjustment 4-49 Major Component Parts Name To Be Exchanged Periodically Time To Exchange Engine Fuel hose (Tank to water separator) 2 years or 4,000 hours Fuel hose (Water separator to fuel injection pump) Fuel hose (Tank to fuel injection pump) Heater hose (Heater to engine) Heater hose (Heater to radiator) Air conditioner hose Hydraulic System Body Pump suction hose Pump discharge hoses Pump side branch hoses Swing motor hoses Travel motor hoses Work Device Boom cylinder line hoses Arm cylinder line hoses Bucket cylinder line hoses