daewoo Solar 140LC-V — Bucket Oring Replacement

BUCKET O-RING REPLACEMENT WARNING! Due to possibility of flying metal objects, always wear safety helmet, protective gloves and eye protection when changing pins. 1. Inspect bucket O-rings on a routine basis. If worn or damaged, replacement is necessary. BBO0030L Figure 83 2. Roll old O-ring (1, Figure 84) onto boss (2) around bucket pin (3). Remove bucket pin and move arm or bucket link (4) out of way. 1 2 4 3 Figure 84 BBO0020L 3. Remove old O-ring and temporarily install new O-ring (1, Figure 85) onto bucket boss (2). Make sure that O-ring groove on both bucket link (4) and boss have been cleaned. 1 2 4 4. Realign arm or link with bucket pin hole and insert bucket pin (3, Figure 84).

Figure 85 BBO0021L 022-00058E Operation and Maintenance Manual Inspection, Maintenance and Adjustment 4-55