daewoo Solar 140LC-V — Maintenance in Special Conditions

MAINTENANCE IN SPECIAL CONDITIONS NOTE: See “Operation Under Unusual Conditions” on page 3-39 for other recommendations. 4-68 Inspection, Maintenance and Adjustment 022-00058E Operation and Maintenance Manual Conditions Maintenance Required Operating in mud, water or rain. 1. Perform a walk around inspection to check for any loose fittings, obvious damage to the machine or any fluid leakage. 2. After completing operations, clean mud, rocks or debris from the machine. Inspect for damage, cracked welds or loosened parts. 3. Perform all daily lubrication and service. 4. If the operations were in salt water or other corrosive materials, make sure to flush the affected equipment with fresh water.

Operating in an extremely dusty or hot environment. 1. Clean the air intake filters on a more frequent basis. 2. Clean the radiator and oil cooler fins to remove embedded dirt and dust. 3. Clean the fuel system intake strainer and fuel filter more frequently. 4. Inspect and clean as required the starter and alternator. Operating in rocky terrain. 1. Check the undercarriage and track assemblies for damage or excessive wear. 2. Inspect for loose or damaged fittings or bolts. 3. Relax track tension. 4. On a more frequent basis, inspect the front end attachments for damage or excessive wear. 5. Install a top guard and front guard as required for protection against falling rock.

Operating in extreme cold. 1. Use the proper fuel for the temperature conditions. 2. Using a hydrometer, check the antifreeze to make sure that it is providing the proper cold weather freeze protection. 3. Verify the condition of the batteries. In extremely cold weather remove the batteries at night and store them in a warmer area. 4. Remove mud build-up as soon as possible to prevent it from freezing to the undercarriage and causing damage.