daewoo Solar 140LC-V — Loading and Unloading

5-2 Transportation 022-00058E Operation and Maintenance Manual Mono Boom Total Height Total Width Total Length Weight Remarks 2,760 mm (9' 1") 2,600 mm (8' 6") 7,700 mm (25' 3") 13.9 metric t (15.30 ton 4.6 m (15' 2") Boom ons 2.5 m (8' 2") Arm s) 600 mm (23.6 in) G Shoe Articulated Boom Total Height Total Width Total Length Weight Remarks 2,910 mm (9' 7") 2,600 mm (8' 6") 8,030 mm (26' 4") 16.40 metr tons (18.08 ton 1.85 m (6' 1") Lower Boom ic 3.5 m (11' 6") Upper Boom 2.5 m (8' 3") Arm s) 600 mm (23.6 in) G Shoe 1. Make sure that the trailer is parked on a firm and level surface. See Figure 1. 2.

Make sure that the ramps that are being used are designed to handle the weight of the excavator. If required, add blocking under the ramp to provide additional support. 3. The ramp angle should be less than or not exceeding a 15° angle. Ramps steeper than this may cause a problem when loading or unloading. HAOC060L Figure 1 4. The unit does not require disassembly for normal over-the-road transportation. If the boom and arm need to be removed, the counterweight will place more weight on the rear of the machine. Make sure to back the excavator onto the trailer so that the counterweight end of the excavator is positioned on the ramp first. See Figure 2. HAOC070L Figure 2