5 TRANSPORTATION Obey all local, state or federal regulations for the transportation of the excavator. If unsure of regulations check with local authorities. Check the intended route for road width, overhead clearances, weight restrictions, and traffic control regulations. Special approval or permits may be required. LOADING AND UNLOADING DANGER! Daewoo warns any user, that the removal of the counterweight from the machine, front attachment or any other part, may affect the stability of the machine. This could cause unexpected movement, resulting in death or serious injuries. Daewoo is not liable for any misuse.
X Never remove the counterweight or front attachment unless the upper structure is in-line with the lower structure. X Never rotate the upper structure once the counterweight or front attachment has been removed. HAAD4060 Figure 102 WARNING! When transporting the machine, know the width, height, length and weight. Loading or unloading the machine can be a dangerous operation. Make sure to run the engine at the lowest speed setting, and travel at the slowest speed possible. Make sure that the ramp being used can handle the weight of the machine. If required, add blocking under the ramp for additional support.
Make sure that the ramp surface is free of grease or mud that could cause the machine to slip or slide. Make sure that the trailer is parked on firm, level ground before attempting to load/unload the excavator. If it is required to turn the machine while it is on the trailer, make sure to do this at the slowest engine and travel speeds possible. Make sure to secure the excavator onto the trailer as required by local transportation laws. 022-00058E Operation and Maintenance Manual Transportation 5-1