Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION does not operate as explained above, there is probably a failure, so ask your Komatsu CHECK EMERGENCY STEERING distributor. 3 - 76 CHECK CENTRALIZED WARNING LAMP, ALARM BUZZER, MONITOR LAMPS AND METE RS Before starting the en gine, set the starting switch in ON position and check that the ma chine monitor operates as follows.

The centralized wa rning lamp is lit for 2 secon ds, then goes o The alarm buzzer s ounds for 2 seconds, then The monitor lamps is lit for 2 seconds, then go off for 1 secon The gearshift indic ator displays "88" for 2 sec onds, then goe The meters start th e operations after the syste m is checked f The character displ ay displays "KOMATSU" f or 3 seconds. If the machine monito distributor for inspecti CHECK BRAKING EFF Check if the braking c apacity of the parking brak e, foot brake, a If any abnormality is fo und, ask Komatsu distribu tor to repair. Check manual emergenc y steering h key to ON position. teering switch (1) ON, and check that th n be operated.

eel cannot be operated, ask your Komats 1. 2. 1. Turn starting switc 2. Turn emergency s steering wheel ca If the steering wh Check auto-emergency s teering witch key to START position and start th ake oil pressure caution lamp is OFF, the ol lever (2) fully and stop the engine. 1. 2. 3. 4. 1. Turn the starting s engine. Check that the br pull retarder contr Turn starting switc Check that the em steering can be op h key to ON position. ergency steering motor is erated 1 sec. after parking actuated and th brake switch ( is set to the TRAV EL position. CHECK BACKUP ALA RM arting switch to ON position. 1. Turn the engine st arting switch to ON positio 2.

Place the gear shi ft lever in the R position an d check that th e backup alarm is worki