. MAINTENANCE SERVICE PROCEDURE LUBRICATING PARKING BRAKE WARNING being NOTICE REMARK Removing fitting (1) makes it possible to release the abnormal 7. If no grease comes out, install fitting (1). the braking capacity. For details, see "CHECK BRAKING CAPACITY OF PARKING BRAKE (PAGE 4 - 70 When perf orming maintenance, raise the brake oil pressure sufficie ntly to p revent the par king brake fro m being a utomatically applied. In addition, hang a warning t ag that can be seen clearly to prevent any other pers on from opera ting the p arkin g brake switch. Do not get any oil or grease on the br ake disc or pad surfac 1.
Stop th e machine in a flat place and put the blocks under the tire s to prevent the machine from moving 2. Raise th e dump body and secu re it in position with t he bo dy pivo 3. Before starting operations, rais e the brake oil pressure s automa tically applied, and chec k that the brake pressure caution lamp is not l 4. Release the parking brake and 5. By usin g a grease pump, pump and (2) (2 places) in the parking Do not use ai r pressure or oil pressure to perform high-pressur e greas 6. After co mpleting the greasing o peration, remove fitting (1) If greas e comes out, wipe off all the grease that comes ou internal pre ssure created by excess 8. Check t 4-52)".