volvo — PV776-QRG07-MP8.pdf

152 BASIC SERVICE Aftertreatment Fuel Injector (AFI) Removal 2. Disconnect all cables from ground (negative) battery terminals to prevent personal injury from electrical shock. 1. Apply the parking brake and place the shift lever in neutral. 4. Connect coolant extraction tool DBT2V700 to the drain fitting at the bottom of the radiator. Drain the coolant. 3. Remove P-clamp screws securing the AFI harness and fuel supply line. Note: An alternative method is to use drain hose 9996049 to drain coolant into a suitable container. W2005656 5. Disconnect the aftertreatment fuel injector fuel supply line.

Collect any residual fuel that might be in the fuel line in a suitable container WARNING When replacing the AFI, check the part number of the injector to ensure that an injector with a proper flow rate for the engine is installed. Installing an injector with the incorrect flow rate may cause dangerously high regeneration temperatures and subsequent DPF damage.