volvo — PV776-QRG07-MP8.pdf

BASIC SERVICE 155 W2005656 7. Install the P-clamp and screws to secure the AFI harness and fuel supply line to the diffuser. 8. Fill the engine cooling system with the recommended coolant using the coolant extractor. 9. Install all previously removed cables to the ground (negative) battery terminals. 10. Perform Aftertreatment Injector Adaptive Factor Reset using VCADS/Premium Tech Tool (PTT). 11. Start the engine, check for leaks and proper operation. After shutdown, replenish fluids as necessary. Cleaning 1. Apply the parking brake and place the shift lever in neutral. 2. Disconnect all cables from ground (negative) battery terminals to prevent personal injury from electrical shock. 3.

Remove P-clamp screws securing the AFI harness and fuel supply line. W2005656 4. Disconnect the AFI fuel supply line. Collect any residual fuel that might be in the fuel line in a suitable container.