volvo — PV776-QRG07-MP8.pdf

156 BASIC SERVICE Note: The coolant lines do not have to be disconnected nor coolant drained for AFI cleaning. 5. Remove and discard the aftertreatment fuel injector mounting bolts and spacers, and then remove the injector from the diffuser pipe attached to the turbocharger outlet. 6. Cover the opening in the diffuser pipe to prevent dirt and cleaning fluid from entering the exhaust system. W2033388 7. Remove and discard the high-temperature gasket and steel plate gasket from the bottom of the injector. 8. Carefully turn the AFI body and spray the injector tip with carburetor cleaning solution. Brush the injector tip with a stiff bristled nylon toothbrush. Repeat two or three times.

CAUTION Do NOT kink the fuel and coolant lines when cleaning the injector. Kinking the lines may result in leakage. CAUTION Only carburetor cleaner should be used for cleaning the injector. Other cleaners, such as brake cleaner products, do not work and may contain chlorine that could damage the catalyst if they enter the exhaust system.