BASIC SERVICE 167 W2033403 7. Using a 3.6 mm (0.142 inch) feeler gauge, 85111377, check the clearance between the brake rocker arm roller and the cam lobe. If the clearance is incorrect, repeat the brake rocker arm clearance adjustment. 8. Mark the respective rocker arm as each valve adjustment is completed. Continuation of Adjustments Continue the procedure by barring the engine to the appropriate timing marks and adjusting the valves and unit injectors at each of the remaining cylinders. Follow the steps described above to adjust the inlet and exhaust valves, and unit injector at each cylinder.
For engines equipped with the Volvo compression brake, tighten the plate spring attaching screws to specification after the valve and unit injector adjustments have been completed.